Monel 400 Alloy Pipe

• Characteristic:

Monel 400 alloy is high-intensity single-phase solid solution.
Monel
400 is an extremely combination property that use for largest amount
and most widely corrosion resistance alloy. This alloy in the
hydrofluoric acid and fluoride gas medium with excellent corrosion
resistance, as well as to the hot concentrated alkali. At the same time,
is also corrosion resistant to neutral solution, sea water, air,
organic compounds. An important feature of this is generally do not
generate a stress corrosion cracking, good cutting performance.

• Product Description:

1. Specification: Seamless 6mm -150mm.
2. Standard: ASTM B 165, GB4742/2000.
3. Property: Good corrosion, Resistance performance.
4. Grade: 400 Series.
5. Thickness: 450mm.
6. Outer Diameter: 6mm -150mm.
7. Technique: HotRolled/Cold Rolled.
8. Section Shape: Round.
9. Special Pipe: Thick Wall Pipe.
10. Secondary or Not: Non-Secondary.
11. Ultimate Strength (≥MPA): 480.
12. Ni (Min): 63%.
13. Elongation (≥ %): 35.
14. Surface Treatment: Polished.

• Product Chemical Composition:

• Product Detail:

• Application:

Used
in the chemical and petroleum chemical industry and marine development,
etc. can be used to manufacture all kinds of heat exchange
equipment,the boiler feed water, heater, all kinds of pressure vessel
equipment. Oil and chemical pipeline, containers, tower, groove, valves,
pumps, the reacting kettle, shaft, etc.