Nickel Alloy Pipe Fittings

Searching Duplex Fittings manufacturers for specific size range? Buy all types of DSS Stub Ends, Cross, 3D/ 5D Bend, U Bend manufactured accordance to ASME B16.9, MSS-SP-43 and NACE MR0175/ MR0103

We, Aesteiron Steels LLP are duplex fittings stockist and supplier. It is been manufactured by premium raw material. We offer these fittings in different size, shape, dimensions, thickness and length.

Duplex 2205 pipe fittings are two-phase, ferritic and austenitic it contains chromium of 22%, molybdenum of 3%, nickel 5 to 6%. It is widely used and is characterized by high yield strength double that of the standard austenitic stainless steel grades.

Duplex steel pipe fittings is the occupation of repairing or installing piping or tubing systems that carry liquid, gas, and occasionally solid materials. It is a ferritic-austenitic microstructure, with a phase balance of approximately ferrite of 50% and austenite of 50%.

duplex stainless steel pipe fittings involves selecting and preparing pipe or tubing, joining it together by various means and the location and repair of leaks. It has many combinations of the beneficial properties of ferritic and austenitic stainless steels.

duplex steel buttweld fittings is a weldable pipe fitting that let a change of direction of flow, to branch off, reduce pipe size or attach additional equipment. It has high mechanical strength and high resistance to stress corrosion cracking. It is also a result of alloying with nitrogen.

duplex stainless steel elbow are installed between two lengths of pipe to allow a change of direction, usually a 90° or 45° angle; 22.5° elbows are also available. It includes good erosion and abrasion resistance, good fatigue resistance, low thermal expansion and high-energy absorption.

duplex reducer is used in process piping that reduces the pipe size from a larger bore to a smaller bore It allows for a change in pipe size to meet hydraulic flow requirements of the system, or to change existing piping of a different size. It is superior to standard austenitics with regard to stress corrosion cracking resistance.

duplex tee is the most common pipe fitting which is used to combine or divide fluid flow. It is available with solvent-weld sockets, opposed solvent-weld sockets, female thread sockets, and a female-threaded side outlet. It can connect pipes of different diameters or change the direction of a pipe run, or both together. It is good in a number of acidic and alkaline environments.